***********************************
                 Ordinary and Armorial, Version 3.05
                      September, 1999 (AS XXXIV)
                 ***********************************

This version of the SCA Ordinary and Armorial Program for Windows
(Windows 95, 98, and NT) comes in three separate disk image files --
you need to download all three of them from this website (OandA1.ZIP,
OandA2.ZIP and OandA3.ZIP).

Once you have downloaded all three files, and you unzip them
(using Winzip, PKUNZIP, or some other software) to a temporary
folder, and run the SETUP program, it will install the software.

** Special Note: If you have 3.04 and it works fine, you don't need
to download this version. If you have NT 4 (and maybe NT 3.51) and
you run 3.04 you may run into problems. The only fix in this version
is for NT ... (something I thought was fixed is now tested better and 
definitely fixed)
--------------------------------------------------------------------

NOTE: 
  Do *not* use a folder/directory pointed to by the DOS command
  SET TEMP -- you can determine this by going to a DOS window
  and typing:

     SET

  and pressing the RETURN key. This will show you any settings,
  such as:

  TEMP=C:\TEMP

  Suggest you use a different folder/directory, if necessary
  create one, like "INSTALL".

  If you do NOT have a TEMP= statement displayed when you do the SET
  command mentioned above, then before you run the installation, go
  to the DOS window again, and:

  MD \TEMP
  SET TEMP=C:\TEMP
  
  Then change your pointer to where you put the install disk images,
  such as:

  CD\INSTALL

  And then run the setup program from DOS by typing:

  SETUP

  This should make it possible to install without errors ...

--------------------------------------------------------------------

* If you have an earlier version, this will overwrite it, and all
  the tables. If you wish to keep the data, before you run the
  setup program, copy all *.DBF, *.MDX files, as well as the 
  file CR.MEM to a temporary location. Then run the SETUP program,
  and copy these files back to the OANDA directory/folder.

* If you have never installed the software before, read the file
  README.TXT. This explains the basics of how it works. You now
  have some empty tables, but you need to download from the web
  the actual data, and the instructions are in README.TXT.

Enjoy, and if you have any problems, please contact me (Hirsch von
Henford) at:  hirschv@mindspring.com

Hirsch